The motorized winch mill is a construction tool for erecting high-voltage transmission lines in the air and laying underground cables. It can smoothly and conveniently carry out lifting and traction such as erecting iron towers and erecting guide (ground) lines under various complex conditions. Motorized winching mills are divided into diesel motorized winching mills and gasoline motorized winching mills, and are divided into two types: lifters and pulleys.

The manufacturer of the high-speed winch will teach you the operation method of the motorized winch:

1. Before starting the machine, the drive clutch of the winch must be opened first, and the front and rear shift levers must be moved to the neutral position, and then the machine can be turned on.

2. When dialing the clutch, the action should be fast, otherwise the interlocking brake will not work, which will increase the impact force of the automatic brake pawl. It is not advisable to use too much force when starting the machine, until the pulley can drive the input shaft to rotate without slipping.

3. When shifting gears, the transmission clutch must be opened, otherwise, the gears will be damaged. After shifting, check whether the shifting is firmly engaged to prevent skipping.

4. In the process of shifting gears, if it is difficult to enter the gear, it cannot be forced to enter the gear.

The hand-crank device helps to block the specific method: use the wrench to turn the hand-crank device to rotate it by an angle, and then the block can be entered.