The detailed explanation of the feeding sequence of gasoline motorized cutters is very responsible for consumers. Feeding can only be carried out under the condition of making full use of raw materials. The following are the high-speed cutter mill manufacturers to share.

The feeding sequence of gasoline motorized grinder products is incorrect. For example, according to the first dry mixing technique, the bentonite and coal powder will gather in the corners of the sand mixer due to segregation. When adding water, the bentonite is first moistened to form a clay mass. If the subsequent mixing is not sufficient, it will become sand beans. Leave it in the molding sand; if according to the first wet mixing technology, the water added first is added to the bentonite and pulverized coal before the water is dispersed, and even if the water is not finished, the bentonite and pulverized coal are added in a hurry, which will inevitably form damin sand beans. After adding the first batch of water to the gasoline motorized grinder product, it should be mixed for at least 10s (rotor type) to 30s (roller type) before adding bentonite and pulverized coal.

In the process of using the product, the three-legged grinder manufacturer will use advanced technology to develop gasoline motorized grinder products. If you want to know more, please pay attention to our website.