Product number | Model | Turn face | Gear | Rotating speed (rpm) | Line speed (m/min) | Traction (T) | Power (kW) | Dimensions (mm) | Weight (kg) |
B1031 | ZJ-QXS-50/25 For Honda GX390 Gasoline/Yamaha MZ360 Gasoline engine/domestic 188F gasoline engine | genuine | Ⅰ （slow） | / | 5.5 | 5 | 6.6 | 1350x820x580 | Single machine weight : 224 |
Ⅱ （slow） | / | 8 | 3 | ||||||
Ⅰ （fast） | / | 16 | 1.5 | power weight:34 | |||||
Ⅱ （fast） | / | 25 | 1.0 | ||||||
reverse gear | slow | / | 3.5 | Lifting is strictly prohibited | Wooden box weight:22 | ||||
fast | / | 10.5 | |||||||
B1032 | ZJ-CXS-50/25 Package186F vertical hand pull diesel engine | genuine | Ⅰ （slow） | / | 5.5 | 5 | 5..7 | 1350x820x630 | Single machine weight:212 |
Ⅱ （slow） | / | 8 | 3 | ||||||
Ⅰ （fast） | / | 16 | 1.5 | power weight:60 | |||||
Ⅱ （fast） | / | 25 | 1.0 | ||||||
reverse gear | slow | / | 3.5 | Lifting is strictly prohibited | Wooden box weight：28 | ||||
fast | / | 10.5 |
The structure of the grinder
The motorized winching mill is composed of a drum wheel, a gearbox, a diesel engine or a gasoline engine and a base frame. The working principle of the motorized winching mill: the winching groove is a traction groove used to directly connect with the wire rope. It is powered by a gasoline engine or a diesel engine and an electric motor. The speed of the box can be adjusted to achieve the required speed. The whole machine is located on the steel structure, which is stable and easy to move.
How to operate a engine powered winch:
1. Before starting the machine, you must first open the drive clutch of the winch mill, and turn the front and rear shift levers to the neutral position, and then start the machine.
2. When dialing the clutch, the action should be fast, otherwise the interlocking brake will not work, which will increase the impact force of the automatic brake pawl. It is not advisable to use too much force when starting the machine, until the pulley can drive the input shaft to rotate without slipping.
3. When shifting gears, the transmission clutch must be opened, otherwise, the gears will be damaged. After shifting, check whether the shifting is firmly engaged to prevent jumping.
4. In the process of shifting gears, if it is difficult to enter the gear, it cannot be forced to enter the gear. You can use the
The hand-crank device helps to block the specific method: use the wrench to turn the hand-crank device to rotate it by an angle, and then the block can be entered.
